EA-5758J-Shanghai European-Asian Synthetic Material Co.,Ltd.

点击这里进入中文版……

Color:Black

1.Characteristic and usage

This product is to endure impact and kind of phenolic moulding materials, it is suitable for injection process with good performance, and also for transfer or compression process. It has good fight impact and certain heat resistance, it is mainly apply to make insulation structural of low voltage of electrical equipment as well as daily use utensil accessory etc. Product appearance submits granular. According to customer needs, can offer color series product.

2.Technological property(see following table)

No.	Properties	Indexes
1	Relative density	1.40-1.50
2	Flexural strength MPa	70-85
3	Impact strength (notched) kJ/m²	2.5-3.5
	Impact strength (unnotched) kJ/m²	6.0-8.0
4	Heat distortion temperature °C	175-185
5	Blazing resistance °C	960
6	Insulation resistance W	10⁹-10¹¹
7	Dielectric strength (90°C) V/m	3.5-6.5
		10-12
8	Medium waste factor (1MHz) tanδ	0.06-0.10
9	Moulding shrinkage %	0.70-0.90
10	Water absorbency mg	5-30
11	Fluidity(Raschig) mm	60-180

Note:The indexes of fluidity (Raschig) and shrinkage are determined by the seller and buyer.

3.Moulding condition for testing sample

Preheating Condition		Curing Condition
Temperature	Time	Temperature	Pressure	Curing Time
°C	min	°C	MPa	min/mm
105-125	10-20	165-175	25-40	1.0

Note:After moulding material is preheated, must join the mould 20-40 second then exhaust air in mould to add again to press.

4.Parameters of injection condition for the product ( for reference )

Barrel temperture. °C		Mould temperture °C		Injection pressure	Keeping pressure MPa	Keep time
Nozzle	Inlet	Fixed mould	Moving mould	MPa	MPa	s/mm
90-100	70-80	165-175	170-180	80-160	100-200	20-30

5.Package and storage

This product is packed the bag of brown paper of lining damp proof paper bag and polybag or weave plastic bag, net weight is 25kgs. We pack to indicate product type, batch number and weight, make date sign.

This product is unfit for to be made moist and be heated, should be stored in the storehouse of dry ventilation, must not be near fiery source and radiator or by sunlight, store the day that expected from production to rise to be one year, exceed to store issue, according to function target requirement, inspect qualified can still use continuously.

Version ID: EA5758J-2005-2.0

The technical data in table is used in guiding and suggesting only, these data is the average that reached from a lot of tests, only for reference. Our company is subject to newest edition in accordance with product quality unceasing improvement principle and technical data change, does not inform separately.

View details of other products