EA-5541-Shanghai European-Asian Synthetic Material Co.,Ltd.

点击这里进入中文版……

Color:Black

1.Characteristic and usage

This product is general and kind of phenolic moulding materials, it is suitable for compression process with good performance, gained the UL94 certificate. It is mainly apply to make insulation structural of low voltage of electrical equipment as well as daily use utensil accessory etc. Product appearance submits granular. According to customer needs, can offer color series product.

2.Technological property(see following table)

No.	Properties	Indexes
1	Relative density	1.35-1.45
2	Flexural strength MPa	70-85
3	Impact strength (notched) kJ/m²	1.7-2.5
	Impact strength (unnotched) kJ/m²	6.0-7.0
4	Heat distortion temperature °C	140-160
5	Blazing resistance °C	960
6	Test of Flammability (UL94) @3.2mm	V-0
7	Insulation resistance W	10⁸-10¹⁰
8	Dielectric strength (step by step at 90°C) V/m	3.5-6.0
	Dielectric strength (short time at 23°C) V/m	12-14
9	Medium waste factor (1MHz) tanδ	0.04-0.10
10	Moulding shrinkage %	0.60-1.00
11	Water absorbency mg	10-50
12	Fluidity（Raschig） mm	60-180

Note：The indexes of fluidity (Raschig) and shrinkage are determined by the seller and buyer, they are only for reference.

3.Moulding condition for testing sample

Preheating Condition		Curing Condition
Temperature	Time	Temperature	Pressure	Curing Time
°C	min	°C	MPa	min/mm
100-125	10-20	165-175	25-40	0.8-1.0

Note：The compression condition may be difference, because the shape, dimension, and usage of produce were difference, the condition adjustment must under the premise that did not reduce the product quality。

4.Package and storage

This product is packed the bag of brown paper of lining damp proof paper bag and polybag or weave plastic bag, net weight is 25kgs. We pack to indicate product type, batch number and weight, make date sign.

This product is unfit for to be made moist and be heated, should be stored in the storehouse of dry ventilation, must not be near fiery source and radiator or by sunlight, store the day that expected from production to rise to be one year, exceed to store issue, according to function target requirement, inspect qualified can still use continuously.

Version ID: EA5541-2005-2.0

The technical data in table is used in guiding and suggesting only, these data is the average that reached from a lot of tests, only for reference. Our company is subject to newest edition in accordance with product quality unceasing improvement principle and technical data change, does not inform separately.

View details of other products